亚洲精品无码久久-亚洲精品无码久久不卡-亚洲精品无码久久久-亚洲精品无码久久久久-亚洲精品无码久久久久app-亚洲精品无码久久久久av麻豆

Hotline::

18675275155

Information

聯(lián)系方式

公 司: Huizhou Jiangtai Technology Co. , Ltd.
地 址: Building A, Guangyuan Feng hardware city, 49 jinshi fifth road, Xiaojinkou, Huicheng District, Huizhou
電 話: 18675275155
E-mail: jt@hzjiangtai.com

How much do you know about the technical implementation elements of electronic component cutting machines?

TIME:2024-01-12View:2335

After the purchase of electronic components, a certain degree of trimming is required according to the needs. For electronic components with pins arranged in a row of left and right intervals, scissors can be used to trim all pins on a row at once. However, for electronic components with two rows and multiple rows of pins, scissors cannot complete the trimming at once and require multiple uses of scissors, resulting in lower efficiency.

 

Technical implementation elements:

 

The purpose of this utility model is to provide an electronic component trimming machine that can use scissors on electronic components to improve production efficiency.

 

To achieve the above objectives, the present utility model adopts the following technical scheme: an electronic component foot cutting machine, comprising a support plate, wherein the support plate is equipped with a conveyor belt component, left and right opposite left and right knife heads, the conveyor belt component comprises a roller drum arranged in parallel before and after, and an annular belt body sleeved on two rollers. A middle plate is provided between the left knife head and the right knife head, and the annular belt body is sleeved outside the middle plate, The left and right cutting heads are both matched with a first driving mechanism. Under the action of the first driving mechanism, the left cutting head moves towards the left side of the middle plate and the right cutting head moves towards the right side of the middle plate.

 

When using the foot cutting machine of this utility model, electronic components are placed on the upper end face of the annular belt body of the conveyor belt component, so that the shell of the electronic components is supported on the annular belt body, and the pins on the left and right sides of the electronic components are respectively located on the left and right sides of the annular belt body. Then, the annular belt body is moved to drive the electronic components between the left and right cutting heads. At this time, the pins on the left side of the electronic components are located between the middle plate and the left cutting head The pin on the right side of the electronic component is located between the middle plate and the right cutting head. The first driving mechanism is activated to complete the trimming operation, and then the annular belt body continues to move the electronic component that has completed the trimming to the cutting end. This utility model can complete the trimming of electronic components in one go, greatly improving production efficiency and reducing labor intensity for workers.

 

As a preferred option, the conveyor belt component is fixed on the upper side of the lifting plate, which is equipped with a second driving mechanism. Under the action of the second driving mechanism, the conveyor belt component moves up and down relative to the middle plate. Among them, according to the needs of different electronic component pin lengths, different heights of lifting plates are selected to enable the utility model to adjust the length of the cutting feet.

As a preferred choice, a vertical plate is provided on the support plate, and a horizontal plate is inherently arranged along the left and right directions on the vertical plate. The upper end face of the horizontal plate is concave to have a fixed groove that runs through the front and back. The middle plate is fixed in the fixed groove, and the horizontal plate is located on the front or rear side of the left and right cutting heads. The above settings are used to improve the support effect of the middle plate and prevent it from shaking left and right, ensuring the effect of foot cutting.

 

As a preferred option, one end of the middle plate extends to the feeding end of the conveyor belt component, and one end of the middle plate located at the feeding end forms a gradually increasing width structure from the feeding end to the discharging end. The middle board can also be used for guiding the movement of electronic components.

 

As a preferred option, a detection sensor is installed on the side of the conveyor belt component, and the detection sensor is located on the front side of the left and right cutting heads. When the detection sensor detects electronic components on the annular belt body, the first driving mechanism starts after AS. Set the time relay delay as, and the detection sensor can be selected as an infrared receiving sensor, or other position detection sensors can be used.

 

As a preferred embodiment, the second driving mechanism comprises a driving motor and a screw rod, wherein the screw rod rotates to move the lifting plate upwards or downwards, and a threaded block is fixed on the lifting plate, which is matched with the screw thread. The lifting plate is provided with several guide blocks, and the support plate is provided with several guide columns. The lifting plate and guide blocks are provided with guide holes that are matched with the guide columns. Use a screw to lift the lifting plate up and down, with higher accuracy to achieve better foot cutting effect.

 

As a preferred option, a cover is provided on the support plate, which at least includes a pressure plate located on the upper side of the annular belt body, and there is a space for the electronic component housing to pass through between the pressure plate and the upper end face of the annular belt body. The pressure plate is used to prevent electronic components from bouncing up when they move.

 

As a preferred option, the supporting plate is equipped with a through groove that runs through the upper and lower parts relative to the left and right cutting heads, and a waste collection box is provided on the lower side of the through groove. The waste collection box is used to collect cut pins.


筆記

Home
Phone
Feedback
主站蜘蛛池模板: 深夜影院在线视频观看 | 久久综合九色综合97伊人麻豆 | 日日爽夜夜操 | 欧美在线中文 | 99久久亚洲 | 中文不卡视频 | 99久久精品男女性高爱 | 女性下面全部视频免费 | 欧美性白人顶级hd | 国产精品一区二区三区免费 | 国产国产成人精品久久 | 99热热久久这里只有精品166 | 久青草国产在线视频亚瑟影视 | 中文字幕在线视频免费 | 久久精品中文字幕不卡一二区 | 欧美成人免费在线观看 | 奇米777在线观看 | 日本高清视频www夜色资源网 | 日韩国产成人资源精品视频 | 操操干| 欧美777精品久久久久网 | 日韩欧美无线在码 | 天天干天天玩 | 亚洲欧美色综合自拍 | 天天躁狠狠躁夜躁2021 | 日本成a人免费视频 | 国产精品公开免费视频 | a毛片a毛片a视频 | 婷婷中文在线 | 色激情五月 | 国产91九色在线播放 | 一级毛片免费不卡 | 天天操天天爽天天射 | 女人l8毛片a一级毛片 | 国产91一区二这在线播放 | 亚洲日本高清成人aⅴ片 | 天天拍天天射 | 97国产精品国产品国语字幕 | 亚洲精品色综合久久久 | 国产福利不卡视频在免费播放 | 亚洲国产精品日韩在线观看 |